baum 714xlt microgluer folderBAUM 714XLT Microgluer Folder Gluer Features:

  • 3 Segmented urethane folding rollers for all idler rollers
  • 2 lines of perforating tooling
  • 10 Perforating blades, 64-tooth
  • 8 Pullout tire asseblies for the exit shafts
  • Mobile cart to enclosed folder air/vacuum pump and mount glue tanks
  • Pre-assembled glue system with minimal installation time
  • GMS controller with mounting post
  • Easy pruge system to clean valves
  • Gear-driven folding rollers
  • Total sheet counter
  • Can be used to create self-mailers and or regular non-glued folds
  • Available in eith 110/1/60Hz or 220/1/50Hz electrical configuration
  • Loading and unloading at the same end of folder
  • Rack and pinion gearing side guides on the feed table

BAUM 714XLT Microgluer Folder Gluer

These complete folder gluer machines use the durable BAUM 714XLT Ultrafold air/vacuum feed folder combined with the easy to use and maintain GMS Microglue control and glue head system. These systems are affordable and use much less floor space than other self-mailer solutions.

There are four models available, the 714XLT-2C, 4C, 4Z and the 714XLT-8Z (shown above)

714XLT-2C has a two-head cold glue system mounted on the feed table and can produce parallel glue lines on the far right and left hand ends of the sheet. This is good for letter and half-fold self-mailers. There is no capability to add glue dots in the middle.

714XLT-4C has a four-head cold glue system mounted on the feed table and can produce parallel glue lines on the far right and left hand ends of the sheet and add two dots in the panel area between the lines to make a more secure self-mailer. This is good for letter and half fold self-mailers that require personal information being secured.

714XLT-4Z has a two-head cold glue system mounted on the feed table and 2 cold glue heads mounted to the #1 fold plate. This model can produce parallel glue lines on the far right and left hand ends of the sheet. The glue can be applied to both sides of the sheet. This machine can produce all of the folds of the 714XLT-2C and can also create self mailers in a “Z” and double parallel fold imposition. This folder does not provide dots in the middle for secured data.

714XLT-8Z has a four-head cold glue system mounted on the feed table and 4 cold glue heads mounted to the #1 fold plate. This model can produce parallel glue lines on the far right and left hand ends of the sheet and add two dots in the panel area between the lines to make a more secure self-mailer. The glue can be applied to both sides of the sheet. This machine can produce all of the folds of the 2C, 4C and 4Z while also completing the ability to provide dots in the middle for secured data.

Specifications

Maximum Sheet Size: 14 in W x 20 in L (35.56 x 50.80 cm)

Minimum Sheet Size: 3 in W x 5 in L (7.62 x 12.7 cm)

Maximum paper weight:  65 lb cover

Maximum side fold – #1 or #2 plate:  13.5″ (34.3 cm)

Minimum size fold:  2.25″ (5.7 cm)

Request for Information