BAUM ST 90 Stitchmaster Stitcher Features:
The BAUM ST90 Stitchmaster ensures profitable production, even with the frequent format changes and the short to medium-length runs now required by the market.
- Compact, double vertical feeders
- Modular design for configuration to specific needs
- Touch screen interface enables quick preparation for each new job
- Stationary stitching with 2 stitching heads; additional heads available for 2-up production
- Rugged trimmer with controlled sequences
- Single stream delivery
BAUM ST 90 Stitchmaster Stitcher
The BAUM ST90 Stitchmaster is an ideal saddle stitcher for commercial printers and binders specializing in short and medium run length print runs. This saddle stitcher also ensures consistently reliable production and can be prepared for each new job quickly and efficiently with the aid of the new touch screen control. The modular design of the Stitchmaster ST 90 lets you configure the saddle stitcher to suit your specific needs. The Stitchmaster ST 90 can be configured with up to 8 vertical pockets and a cover folder feeder or maximum ten vertical pockets. Single or double manual feed stations can be included in any machine configuration.
Output production mode: max 9000 cycles per hour, min 1500 cycles per hour
Output inching mode: 1000 cycles per hour
Book thickness: .375 in.
Trimming all 3 sides: 2 in. (51mm)
Signature lap high folio: max .625 in. (16mm), min .313 in. (8mm)
Signature lap low folio: max 1.00 in. (25mm), min 0.25 in. (6mm)
Formats, Double Vertical Feeder, trimmed (width x spine length):max 12.00 x 13.75 in. (305mm x 349mm) min 3.5 in. x 4.63 in. (90 mm x 118 mm)
Formats Double Vertical Feeder, untrimmed (width x spine length: max 12.25 in. x 14.00 in. (311mm x 356 mm)
Formats, Cover Folder Feeder, unfolded (width x spine length): max 24.25 in. x 14.00 in. (616mm x 356mm)
Formats, Cover Folder Feeder, folded (width x spine length): min 3.88 in. x 4.75 in. (99mm x 121mm)
Electrical connections: 220 VAC/3PH/50/60HZ
Request for Information