BAUMFOLDER Fold Roll and Fold Plate - Setting

For models: Mark I, Ponys, Jr. Jet, 017, 400, 500, O&M, and Futura Series

To set the fold rolls and fold plates you will need the following gauges:

You will also need a protractor.

These gauges are available through our Parts Department at 1-800-543-6107 or 1-937-492-1281.

Use the following illustrations and tables for setting the fold rolls and fold plates:

CAUTION: ALWAYS FOLLOW THE MANUFACTURE’S SAFETY RECOMMENDATIONS WHEN ADJUSTING FOLDER SETTINGS
image
Figure 1
image
Figure 2
image
Figure 3
image
Figure 4

Plate & Deflector Settings

Parallel Section Parallel Deflectors
#1 Fold Plates .015 #1 .015
#2 Fold Plates .015 #2 .015
#3 Fold Plates .025 #3 .025
#4 Fold Plates .025 #4 .025
8-Page Section Fold Plates Deflectors
#1 Fold Plates .020 #1 .015
#2 Fold Plates .020 #2 .015
#3 Fold Plates .025 #3 .030
#4 Fold Plates .030 #4 .035
16-Page Section Fold Plates Deflectors
#1 Fold Plates .020 #1 .015
#2 Fold Plates .020 #2 .015
#3 Fold Plates .030 #3 .035
#4 Fold Plates .035 #4 .040

If these items do not resolve the problem please contact our Technical Support group at 1-800-543-6107

Back to Top ↑