BAUMFOLDER BAUM20 Static Eliminator Installation

There are (2) static bars (1) Power Pack and a mounting kit included with the Static Eliminator.

One bar is to be mounted at the entry side of the fold rollers and the other at the exit side.

The cables on the bars are inserted into the connections on the main power pack.

The bars are to be mounted approximately no greater than 1 inch above the paper.

The hardware kit consists of universal mounting brackets that must be bent to fit the folder. The universal bracket kit is used because there are so many different folders in the market. Note that there are different “C” brackets for the tiebars. This is also due to the wide variety of folders that this accessory is used on.

Reference the pictures below to see proper positioning.

image
Static Eliminator Bar Mounted on Entry Side of Baumfolder 2020 Folder

image
Static Eliminator Bar Mounted on Exit End of Baumfolder 2020 Folder

image
Entry Side Bracket		 image
Exit Side Mounting Bracket

image
Power Pack with Bars connected

Back to Top ↑