The response to each of the questions will open in a separate browser window to make it easy to print. When you are done with that question, simply close the browser window and you will be back to this page.
Our technical support group will add to this list as needed. If you have a question not addressed below please call toll-free, 1-800-543-6107 and direct your questions to our technical services department.
Or, if you prefer, e-mail us at techservice@baumfolder.com
Thank you for your interest in Baumfolder products.
Older Folders and Cutters
2020, 2018, 2015 Folders
714 Table-top Folders
1. If the counter is not working and the counters are one of the following: BC-100, BC-200, BC-300, DATATRAC III, DATATRAC I, OR DATATRAC IV
Contact: P.D.I. Systems; Indianapolis, IN; Phone# (317)247-6040.2. For Lawson-Baum Cutters please contact:
Lawson Service Phone# (800)265-2702.3. How do I set the Feed Caliper?
4. How do I adjust the pile height?
5. I am Rebuilding my folder, how do I set the Fold Rolls and Fold Plates to the fold rolls?
...For the following Models: Mark I, Ponys, Jr. Jet, 017, 400, 500, O&M, and Futura Series
directions are here.
...For the Models: Mark II, 200 and 700 Series directions are here.1. I have FC Relay Messages - Check the following fuses. F1 & F2 on the circuit board.
2. I have CLR Stop Message - Check the fuses F8 & F9 on the circuit board.
3. Overrun Message, Service Bulletin
4. Inch/Metric - Length will not go under 150 - Length is now in metric. How do I change this?
5. How Do I Install Static Eliminator Bars?. The answer is here.
1. On 714A or B with Air, I just changed tires on sucker wheel, Now I'm having trouble feeding. What do I need to do?
2. On 714 the drive motor keeps shutting off. Whats wrong?
3. How do we set-up to Score or Perf?
4. I run a lot of 'Z' fold work and I have sheets jamming and missing the number 1 fold plate. What can I do?
5. I am getting a wrinkle on the trailing edge of my paper that runs perpendicular to the fold. What is wrong?
6. On my 714MP I am always getting the error message 'folder jam'. What is wrong?
Floor Model Folders . . . .Table-top Folders. . . .Paper Cutters
Paper Drills. . . .Finishing Equip. . . .Specialized Application Equipment
Baumfolder home page
Last Updated January 24, 2005