D5-MT with 5 heads (Moveable Table Drill)

Nearly Effortless Drilling

Features

  • 5-drilling head capacity
  • Moveable table traverses side to side
  • Positive gear driven heads
  • Ideal for drilling special forms and planners etc.
  • Hydraulic operation
  • Head alignment without use of tools
  • Exclusive medical forms drilling capability
  • Safety interlock guards
  • Drill bit installation and removal without use of tools

D5-MT Drill

The unique feature of the moveable table enables very close center to center hole drilling and repeatable multiple patterns by simply traversing the table from right to left or left to right and back again. A series of adjustable stops enable special hole patterns to be repeated. The traversing of the table eliminates the need to move the paper by hand to the next drilling location. This increases the quality of the drilled product since paper is not being disrupted during multiple passes of drilling.

Specifications:

1-1/4 in” (3.18CM) center to center minimum distance between holes in fixed position
3/8 in (10mm) center to center minimum distance between holes with moveable table
Capable of drilled hole sizes using bits from 1/8 to ½ in (3.1 to 12.7cm) diameter
Full 2 inch (5.1cm) high lift capacity
Electrics: 220/3/60 or 380-415/3/50
Metric/inch scales

Contact your sales representative to learn more about this product.